Pro-ject Turntables

Category Title
Quick View

In my experience, any Pro-Ject turntable will offer solid build quality and attention to detail. The Pro-Ject X1 follows that trend, with a heavy 12" acrylic platter that reduces resonance and noise, a carbon fiber/aluminum tonearm for superior rigidity, and a rugged MDF base with four adjustable aluminum feet. The motor is decoupled from the chassis for reduced vibration transmission, and a stainless steel bearing with soft brass bushing and Teflon mirrors keeps the platter's rotation smooth and quiet.

...with an upgraded cartridge

The cherry on top of the proverbial sundae is a factory-mounted Sumiko Olympia moving magnet cartridge. The Rainier features an elliptical diamond stylus that tracks a record groove with precision. Solid frequency response in the 12-30,000 Hz range ensures that you can hear exquisite detail in your favorite recordings. 

  • heavy 12" acrylic platter reduces resonance and noise
  • built-in precision speed control with top-mounted electronic switch (33-1/3 and 45 RPM; 78 RPM with belt change)
  • noise-reducing stainless steel platter bearing with soft brass bushing and Teflon mirrors
  • 8.6" tonearm with carbon/aluminum sandwich construction for superior rigidity
    • Kardan ultra-low friction precision tonearm bearing
  • includes pre-mounted Sumiko Olympia moving magnet cartridge
    • frequency response: 12-30,000 Hz
    • stereo separation: 30 dB
  • medium density fiberboard (MDF) chassis with four adjustable aluminum feet
  • synchronous AC motor decoupled from base for reduced vibration transmission
  • speed variation: ±0.3% @ 33-1/3 RPM (±0.25% @ 45 RPM)
  • wow and flutter: ±0.15% @ 33-1/3 RPM (±0.13% @ 45 RPM)
  • signal-to-noise ratio: 68 dB
  • gold-plated RCA audio jacks
  • 16-3/8"W x 5-1/4"H (with dust cover down) x 13-3/16"D
  • weight: 15.43 lbs.
  • warranty: 2 years (1 year for the supplied cartridge)
  • Our 60-day money-back guarantee
  • requires a phono preamp or phono input on receiver or preamplifier
  • MFR # PRO1145022

What's in the box:

Pro-Ject X1 owner's manual

  • Turntable (tonearm and cartridge installed)
  • AC power supply (attached 6.5' DC cord)
  • 3 AC plug adapters (US/UK/EU)
  • Acrylic platter
  • Hub (installed)
  • Flat belt (for 33 rpm and 45 rpm playback)
  • Round belt (for 78 rpm playback)
  • Felt mat
  • 47" RCA stereo cable (attached ground wire)
  • 45 RPM adapter
  • Anti-skate weight
  • Counter weight
  • Dust cover
  • Tonearm tool
  • Plastic hook-tool
  • Hex-key
  • White Gloves
  • Two-Point Cartridge Alignment Protractor
  • Instructions For Use
  • Warranty Information

*Price includes domestic shipping.

Pro-ject - X1 Turntable (Walnut)
Quick View

The T1 from Pro-Ject Audio Systems is the first T-Line turntable, aiming to deliver true high-fidelity sound on a limited budget. Boasting premium materials, stylish aesthetics and a rich, lively sound, the extensive development process has ensured that there has been no compromise made in the sound performance when achieving such an affordable budget. The stylish CNC-machined plinth, available in High Gloss Black, Satin White or Walnut finish, features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Avoiding the flaws of plastic or lightweight steel alternatives. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system.

-Speed: 33,45 (manual speed change) Belt drive

-Speed variance 33: 0.7% 45: 0.6%

-Wow & Flutter 33: 0.25% 45: 0.23%

-Platter: Heavy 8mm, blasted-glass platter with felt mat

-Main bearing: Stainless steel/brass

-Signal to noise: 65dB

-Tonearm: 8.6” aluminium

-Effective arm length: 218.5 mm

-Counterweight for mass: 5 - 10g (pre-mounted)

-Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)

-Included accessories: dustcover, feltmat, cable attached to record player

-Built-in Power Supply: 230V 50Hz (US: 110V 60Hz)

-Power consumption: 3 Watt max

-Dimensions: 415x100x335 mm (WxHxD)

-Weight: 3.8 kg net

*Price includes domestic shipping.

Pro-Ject Turntable - T1 Phono Sb (Om5e) Walnut
Quick View

Boasting premium materials, stylish aesthetics, and a rich, lively sound, extensive research & development have ensured no-compromise build & sound quality for a ‘table in this range. Building on the base-model T1, T1 Phono SB features a quality, deafeatable MM phono preamp and ‘Speed Box’ technology, allowing for push-button speed selection while reducing speed variance. The stylish CNC-machined plinth (gloss black, satin white, satin walnut foil) is free of plastic parts and is carefully manufactured to ensure there are no hollow spaces, which prevents unwanted resonance within the chassis. Carrying this philosophy throughout, the glass platter is also a massive, zero-resonance design with aesthetic appeal. To support the deck, purpose-selected turntable isolation feet prevent ambient vibration near your system from affecting your playback.

  • Nominal speeds: 33/45 r.p.m.
  • Speed variance 33: ±0,70%, 45: ±0,60%
  • Wow and flutter: 33: ±0,25%, 45: ±0,23%
  • Signal to noise: 65dB
  • Effective tonearm mass: 8,0g
  • Effective tonearm length: 8,6″ (218,5mm)
  • Overhang: 22,0mm
  • Power consumption: 4,5W
  • Power supply: 15V/ 0,8 A DC, universal power supply
  • Gain: 34dB
  • Output voltage: typically 200mV/1kHz at 5mV/1kHz input
  • Input impedance: 47kohms/100pF
  • Noise floor: 68dB
  • RIAA-equalisation curve accuracy: 20Hz-20kHz / max. 0,5dB

*Price includes domestic shipping

Pro-Ject Turntable - T1 Phono Se Piano Black
Quick View

All-in-One Analog and Wireless Streaming in One Turntable: European-Made Pro-Ject T1 BT Features Integrated Phono Preamp, Ortofon Cartridge, Bluetooth Transmitter, More

Built for music lovers that want the pleasures of analog as well as the convenience afforded by wireless Bluetooth, the Pro-Ject T1 BT belt-drive turntable comes with everything you need to spin LPs—including a built-in phono preamplifier and an Ortofon OM 5E MM phono cartridge—as well as an integrated Bluetooth receiver for times when you just feel like streaming to any Bluetooth-enabled speakers. An all-in-one entry-level audiophile marvel, the European-made T1 BT expands your listening options all the while delivering lively dynamics, vivid imaging, and lush tonality.

Underneath T1 BT's high-gloss finish, you'll find a CNC-machined plinth that involves no plastic parts. It arrives carefully constructed to eliminate gaps and hollow spaces that cause lesser turntables to vibrate and rob music of clarity and focus. A heavy blasted-glass platter further reduces resonances common to cheaper plastic or lightweight steel designs. Utilizing a newly developed sub-platter and bearing assembly found in Pro-Ject's highly praised Essential III Series, T1 BT renders black backgrounds and provides propulsive pacing that will keep you reaching for record after record. Once your guests hear T1 BT's soundstaging, clarity, and natural balance, don't be surprised if they start shopping for one of their own.

T1 BT also comes ready to play with Ortofon's OM 5E MM cartridge and a one-piece, 8.6-inch aluminum tonearm. And because the T1 BT touts super-shielded, low-capacitance RCA cables, you won't have to worry about about noisy hum and radio-frequency interference that make lesser turntables a challenge to properly position. Vibration-absorbing feet, an elegant dustcover with adjustable hinges, a felt record mat, and the choice of three attractive finishes help round out this analog steal.

If you're searching for analog convenience without sacrificing sound quality, and a unit complete with a built-in phono preamp and Bluetooth options, T1 BT is a budget-conscious dream. 100% Music Direct Guaranteed.

-Speed: 33, 45 (manual speed change)
-Principle: Belt drive
-Speed variance:
   33: 0.7%
   45: 0.6%
-Wow & Flutter:
   33: 0.25%
   45: 0.23%
-Platter: Heavy 8mm, blasted-glass platter with felt mat
-Main bearing: Stainless steel/brass
-Signal to noise: 65dB
-Tonearm: 8.6" aluminum
-Effective arm length: 218.5 mm
-Overhang: 22.0 mm
-Effective tonearm mass: 8.0 g
-Counterweight for mass: 5 - 10g (pre-mounted)
-Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
-Outputs: RCA Line, RCA Phono, Bluetooth
-Included accessories: dustcover, feltmat, power supply, high-quality phono/line RCA cable
-Built-in Power Supply: 110 - 240V/50, 60Hz; 15 V DC 800mA
-Power consumption: 3 Watt max
-Dimensions (WHD): 16.3" x 3.9" x 13.8"
-Weight: 8.4 lbs.

*Price includes domestic shipping.

Pro-ject - T1 Phono BT Turntable (Black)
Quick View

Pro-Ject Speaker Box 5 are compact 2-way monitors using a bass-reflex enclosure design. They exhibit fast, tuneful bass, lively dynamics, and low coloration that belie their size & price. The enclosure is magnetically shielded for safe placement near computers and other sensitive electronics. Available in high-gloss black, white or red, they look great in any room and with any system. Magnetically attachable grilles are included!

  • Sensitivity (1W/1m): 86dB
  • Recommended amplifier power: 10-150W
  • Tweeter: 25 mm Ø silk-dome
  • Magnet: Neodymium
  • Woofer: 130 mm Ø fiberglass cone
  • Frequency response: 55Hz-20kHz
  • Impedance: 4-8 ohms
  • Dimensions (W x H x D): 16 x 25.5 x 21cm
  • Weight: 4.2 kg

*Price includes domestic shipping.

Pro-ject - Speaker Box 5 Speakers (Black)
Quick View

The Pro-Ject Phono Box E BT is a fantastic option for entry-level vinyl enthusiasts. Allowing you to connect two separate inputs, one phono for your turntable and one line level input. 

 It can be used as an ordinary MM phono stage that connects to any hifi amplifier or powered speaker via its line level output (3.5mm jack) or it can be used as a Bluetooth streamer for you to connect to a Bluetooth speaker.

  • Wireless Bluetooth streaming from line or phono sources to your Bluetooth speaker
  • 2 Inputs: 1 Phono and 1 Line Input
  • Suitable for MM cartridges
  • Precise RIAA equalisation
  • Use analogue RCA & Bluetooth output simultaneously
  • Low noise circuitry
  • Internal metal shielding
  • Gold-plated RCA connectors

*Price includes domestic shipping

Pro-Ject Phono Pre-Amp W/Bt - Pro-Ject Bluetooth Pre-Amp
Quick View

Pro-Ject has decided to go after the entry-level market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real plug & play in every way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for the included Ortofon OM 5E cartridge.

The hidden secret to the new table’s sonic success, is a central gravity mass point, made from an artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.


  • Belt drive system
  • Integrated motor control with DC power supply secures silent running
  • Central gravity mass point made from artificial stone
  • Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
  • Low resonance particle board platter with felt mat
  • 8,6” ultra low mass tonearm with straight arm tube
  • Pre-adjusted tracking force & antiskating
  • Gold-plated RCA contacts & cartridge pins
  • Colour options: red-black, white-black, silver-black
  • Specs
  • Speed: 33, 45 (manual speed change)
  • Speed Variance: 33: 0,80% 45: 0,70%
  • Wow & Flutter: 33: 0,29% 45: 0,27%
  • Platter: 300mm MDF
  • Tonearm: 8.6” metal tube
  • Effective arm length: 218.5 mm
  • Effective tonearm mass: 8.0 g
  • Overhang: 22.0 mm
  • Counterweight for mass: 3 - 5.5g (included)
  • Tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
  • Output: RCA (phono)
  • Included accessories: RCA cable, 15V DC power supply
  • Power consumption: 4.0 Watts
  • Dimensions: 415 x 90 x 300mm (WxHxD)
  • Weight: 2.7 kg net
  • In the Box
  • Elemental with Ortofon OM 5E
  • Power supply
  • Directly soldered RCA Phono Cable
  • Felt mat
  • Adapter for 7“ singles
  • Hexagonal allen wrench

*Price includes domestic shipping

Pro-ject - Elemental Turntable (Red)

back to top